220 * 220mm Flex Magnetic Print Bed Tape Hot Bed Sticker Build Surface Tape 3D Printer Platform Heatbed (A+B) Co-link

£10.49 In Stock
Customer reviews(3)
+
  • High Quality: This 3D Printer Bed Surface set is made of composite material. Frosted film is very glossy and beautiful.
  • Save money: The set can be used again and again so you can save more money.
  • Wide Usage: Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Easy to Use: The A plate is flexible, frosted and magnetic. It is easy to move away from build platform and take away from printed models. B with Background is made of 3M adhesive, easily stick on the heat bed platform, and instant bonding with convenient use. It installs more quickly and with fewer bubbles than tape or films.
  • The surface of A plate is able to resist high temperature to around 120 - 150 ℃ in short time.


Specification:
Name: Magnetic Print Bed
Color: Black
Size: 0mm*0mm
Weight:0g
Material: Composite material
Package Including:
* A + * B D Printer Platform Heatbed
Features:
. This D Printer Bed Surface set is made of composite material. Frosted film is very glossy and beautiful.
. The set can be used again and again so you can save more money.
. Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
. The A plate is flexible, frosted and magnetic. It is easy to move away from build platform and take away from printed models. B with Background is made of M adhesive, easily stick on the heat bed platform, and instant bonding with convenient use. It installs more quickly and with fewer bubbles than tape or films.
. The surface of A plate is able to resist high temperature to around - 0 &#x; in short time.
Attention:
. Because of the material of the product, it is recommended that the temperature of the hot bed should not exceed 80 degrees.
. Please do not make the heated nozzle touch the A plate directly.


Customer reviews(3)

Write Review
Chief Reviewer
26 October 2018
So I purchased this half expecting it to go in the bin within a few hours... How surprised was I when things just decided to stick! Very easy to peel off. Still in a bit of shock on how well it's performing. Very easy to fit, just peeled back the 3M adhesive and carefully moved down using a credit card to get rid of any air. If I can fit it then anyone can :-) I trimmed the top every so slightly on the corners, just with a pair of scissors, really easy to cut.

Seems to work well, been running the bed at 60 degrees for PLA and PETG. no problems at all. Just remember if you've added this to your bed you will need to adjust your bed height!!! Would recommend and buy again.

Please click yes below if you found this review helpful :-)
Peter
28 November 2018
I bought this because I was having sticking issues with my first layer, and thought it would be great. Installation is very easy, but the top surface isn't seen by an inductive z-probe on my Anet A8. So every time I use G28 to home all axis, the nozzle crashes in to the print surface before I've even had a chance to use it.
If you want to use this with your 3d printer, make sure yours doesn't use an inductive probe like the stock Roko SN04 on the Anet A8.
Aroop Kumar Sen
13 November 2018
I bought it thinking that it might not work. I used to struggle with the first layer of my every print not sticking.
now its simply printing and forgetting about it.

Recommend Products

Anet V1.5 3D Printer Accessories motherboard Control Board for Anet A6 prusa I3 Reprap 3D Printer parts HANDOO

£28.63

KKmoon 2pcs 8mm Brass Flange Trapezoidal T Lead Screw Nut for RepRap i3 3D Printer Z Axis AZ-456

£4.19

XCSOURCE 12PCS Linear Bearings LM8UU 8MM *15*24 RepRap 3D Printer Prusa Mendel CNC TE249

£6.99

3D Printer Slide Block Linear Bearing Ball 4PCS SCS8UU Roller Eewolf (HKK)

£6.99

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

£5.59

KEESIN 3D Printer Linear Motion Ball Bearing Slide Bushing Open Block Linear Guide Rail Pack Of 4 (SBR16UU)

£11.19

2 PCS Flexible Couplings 5mm to 5mm NEMA 17 Shaft for RepRap 3D Printer Prusa i3 or CNC Machine NAWINNER

£4.89

Richer-R 3D Printer Timing Pulley, 2GT 5mm / 8mm 20T Aluminum Alloy Gear Synchronous Timing Belt Pulley Glossy Surface Appearance Robust Structure 3D Printer(5Pcs)(8mm)

£3.77