INA KSR16-L0-06-10-20-08 Roller Chain Idler Sprocket Unit

£36.21 In Stock
Customer reviews(0)
  • Sprocket made from steel or sintered iron
  • Ready-to-fit units

Product Description

Roller Chain Idler Sprocket Units Are Guidance And Return Units For Roller Bush Chains And Roller Chains. They Can Compensate For Chain Stretch Resulting From Operation And Give Smoother System Running Under High Loads And Speeds. The Ready-To-Fit Units Comprise Sprockets And Deep Groove Ball Bearings Or Radial Insert Ball Bearings. The Sprockets Are Made From High Strength Steel, Sintered Iron Or Plastic polyamide. Sprockets Made From Plastic Give Particularly Smooth Running And Generate Very Little Noise. Since The Inner Ring Of The Deep Groove Ball Bearing Is Extended On Both Sides, No Additional Spacer Rings Are Required. In Series KSR.-B0, The Inner Ring Is Located On The Shaft By Means Of A Locking Collar. The Bearing Bore Of This Series Has A Plus Tolerance. As A Result, Machined Shafts Up To Is Tolerance H9 Can Be Used Under Moderate Loads And Speeds.

Customer reviews(0)

Write Review

Recommend Products

GT2 20T W10 B8 Wheel 8mm Bore Grub Belt Pulley CNC Reprap Unbranded/Generic


Sorbothane Vibration Isolation Circular Pad 50 Duro (2.54cm Thick 10.16cm Dia.) - 4 Pack Isolate It! 0534100-50-4


sourcingmap® Light Load Spiral Stamping Compression Die Spring 20mm x 100mm Blue a15102700ux0909


sourcingmap® 16mmx55mm Chromium Alloy Steel Medium Load Die Spring Red a15102700ux0463


sourcingmap® Heavy Load Spiral Stamping Compression Die Spring 25mmx75mm Green a15102700ux0854


DealMux 16mmx40mm Chromium Alloy Steel Lightest Load Die Spring Yellow DLM-B0190030N4


T5 TIMING PULLEY 25 TEETH Pulleys & Belts Toothed - T5 TIMING PULLEY 25 TEETH, Bore Diameter Max: 4mm, External Diameter: 39mm, External Width: 12mm, No. of Teeth: 25 MFA20830


Thomson QSSS 1/4 L 6, Quick Shaft, 0.2490/0.2495 in Diameter, Class L, 440C Stainless Steel, 50 Rockwell C Min, 6 in long Thomson industries