Pen is a magic pen with suprise, which can draw in the air and make your "painting" or "doodle" in dimension. Release your imagination from paper and make your object in a vivid and lively shape.
N. W.: G
Extra power input: DCV,2A
Adapter input: AC00V~0V 0/60HZ, 0.A
Power Input: DCV ±0.2V
Consumable filament: PLA/ABS .7mm±0.02mm
Working temp: PLA 60-80, ABS 80-20
Unloading mode: click/double click
* SL-00 D Pen
* USB cable
* power adapter
* User manual
* Drawing board（transparent
* finger stand
2 * .7mm Filament PLA (m random colors)
* Patterns Stencil of D drawing
. Children must be accompanied and monitored by adult when using the pen.
2. The D pen nozzle is hot during work. No touch to avoid burning.
. the D Pen will be paused automatically in every 8 minutes for self-protection, you could click the "Load" key again to continue drawing if needed" / "when the light from red turn to green, you can select one of below two ways to feed in the filament".
4. You have to tug at the filament a little but not too much. Make sure you remove the filament if your not using it for a few minutes otherwise it's difficult to extract. You can have fun with the pen but trying to create certain things will take a little practice you have to get used to the speed of flow suited to your skills.